Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Rubber Vacuum Exposure Unit Blanket 49" x 60" (Baselayr & X-Vactor Compatible)Vacuum exposure unit blankets rip from time to time after years of use. This is an economic way to replace your vacuum exposure blanket without breaking the bank or ordering parts from the manufacturer. Most vacuum exposure lid frames unbolt or unscrew and allow you to replace the rubber blanket inside. This is one piece cut to 49" x 60" 3mm Standard Black Rubber Baselayr and X Vactor Compatible NOTE: There is a no return policy on this item.

MISC APPAREL

Unit dimensions: 27”(W) x 40”(L) x 9”(H)

These hinges will do the trick

NOTE: If too much pigment is added to the mixing base it will not cure properly

Fully Programmable Settings: Users can set dwell time

Heater power requirements: 240V

Professional Grade Performance: Designed for commercial screen printing operations that require consistent results

EXPOSURE UNIT DRYER FEATURES AND SPECS

General Safety & Precautions

not as much heat is needed

24 and 38 mesh is used mainly for glitter inks that need a very open mesh for printing

Measures 0 – 130 N/cm