Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab ECD - Even Clock DividerA simple 2HP clock divider that outputs the original clock at even (mostly squared) divisions. Inputting a clock signal into the ECD of between 2. 5V 10V and up to 10KHz will output clock signals at divisions of 1 2, 1 4, 1 8, 1 16 1 64 and 1 128 by default. Output signals are 6. 2V. Inputting an up edge gate trigger at the RESET jack simply resets the output clocks to start again from the first pulse. Required reset pulse is 2. 5V 10V at up to 10Khz.

2x low pass gates

The 1/6 output exceptionally has a HIGH:LOW ratio of 4:2

5V – 10V and up to 10KHz will output clock signals at divisions of 1/3

To do this use a jumper to connect AIN* to BNORM

both or ramp fall

Or can be used to modulate another CV in the same way as a VCA

With a signal (either audio/CV/clock/etc

GATE the portamento effect stop

With the cutoff CV attenuated

Duty cycle of all outputs is 50% or 1:1 rounded down to the nearest input clock pulse

54mm pitch IDC cable to connect the EG-CVX with the Takaab EG ONLY

it is still useful for most applications where a 1v/oct signal does not need to be maintained over a wide range