GIANT FusionLock Nano Adhesive (Drip & Brush) 473ml/16oz - w/ 4x application brushes | High Temperature 3D Printing Glue for Hot Beds | Fast Application

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

GIANT FusionLock Nano Adhesive (Drip & Brush) 473ml/16oz - w/ 4x application brushes | High Temperature 3D Printing Glue for Hot Beds | Fast ApplicationIntroducing the GIANT 16oz FusionLock Nano Adhesive bottle! Great for 3D printer print farms, shops, commercial 3D printing, and more! Our FusionLock Nano Adhesive is the ultimate 3D printing adhesive for standard and high performance filaments. Say goodbye to failed prints and hello to hassle free printing. With one layer of FusionLock Nano Adhesive, you can print 50+ times without losing adhesion. Our adhesive works on various build surfaces,

make sure to put your prints on a clean portion of your bed surface if you have damaged to your bed plate surface

Helpful Tips Before Printing:

Our Build Surface Cleaner is a powerful degreaser and emulsifier that works on various build surfaces such as glass

Step 9: Repeat Steps 7 & 8 to create 2-3 layers of Part B Metallic Transfer Adhesive

High-temp - Nylons

excessive brushing can disrupt the previous layer *at least two Part B Metallic Transfer Adhesive layers highly recommended for best results*

*Following the next steps for Part A & B correctly is very important to guaranteeing you the best possible finish*

This step is VERY IMPORTANT for proper film transfer

carefully bend the flexible steel plate to release the printed part

Done correctly

Leaving a sparkling brushed metallic appearance on the bottom surface

and 15mm/s Jerk or 5mm/s Square Corner Velocity